
Installation
Rack Mounting SmartRack 116 IP
20 | SmartRack 116 IP
Figure 14 –
5.
Repeat steps 1 to 4 for the other side.
2.4.3 Connecting
You can connect the
kit.
To connect to a rack:
1.
Move the rail until two screws appear.
2.
Loosen slightly the seven
3.
Adjust the rear bracket to fit your cabinet.
4.
Install the front and rear bracket onto the cabinet.
Tightening the Long Bracket
Repeat steps 1 to 4 for the other side.
to a Rack
Switch to a rack, using the supp
Move the rail until two screws appear.
15 – Exposing Two Screw
Loosen slightly the seven
screws.
16 – Loosening the Screws
Adjust the rear bracket to fit your cabinet.
17 – Adjusting the Rear Bracket
Install the front and rear bracket onto the cabinet.
hardware
Komentáře k této Příručce