Minicom Advanced Systems Smart 4 Uživatelská příručka Strana 33
- Strana / 92
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
To configure Device ID
1. In Device Name,
type a name for
2. In TCP Port,
type the number of the port (from 800 to 65535)
3.3.2 Configuring
the
When a DHCP server is active on the same network to which
connected, the DHCP
can provide
recommend using MAC address reservations in the DHCP server to ensure that the IP
address of the
SmartRack 116 IP
Consult
your Network Administrator regarding the use of the DHCP
If
you have access to the server
device name will appear on the DHCP server’s interface, making it easy to
locate.
To configure
the device IP address
Select automatic IP
address
enable a DHCP server that is active on the same network to which
IP
is connected, to provide automatic IP assignment
Select manual IP address assignment
the DHCP, and then
type the
LAN 1
, provided by your Network Administrator
3.3.3
Configuring Centralized Management Settings
Minicom’s Centralized Management IP
servers and network devices,
environment. The Centralized Management systems combine
access with modern IT standards and requirements. They are the most
comprehe
nsive remote server maintenance solutions available in the market today.
To configure
Centralized Management settings
1. Select the
Enable Centralized Management
be remotely managed by a Centralized Management system
When managed by Centralized Management, only Network Configuration is
available from the
SmartRack 116 IP
as Device Upgrade, Factory Restore, and SSL C
managed from Centralized Management.
2. Select the
Manager Auto Discovery
system to
automatically detect
network segment.
OR
Configuring
Configuring
settings:
type a name for
SmartRack 116 IP.
type the number of the port (from 800 to 65535)
.
the
Device IP Address
When a DHCP server is active on the same network to which
SmartRack 116 IP
can provide
automatic IP assignment.
However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
SmartRack 116 IP
will not be changed.
your Network Administrator regarding the use of the DHCP
.
you have access to the server
, your configured (or default)
SmartRack 116 IP
device name will appear on the DHCP server’s interface, making it easy to
the device IP address
, do one of the following:
address
assignment – Select the Enable DHCP
checkbox to
enable a DHCP server that is active on the same network to which
SmartRack 116
is connected, to provide automatic IP assignment
.
Select manual IP address assignment
– Clear the Enable DHCP
checkbox to disa
type the
IP Address, Subnet Mask, and
Default Gateway
, provided by your Network Administrator
.
Configuring Centralized Management Settings
Minicom’s Centralized Management IP
-based systems ensure
secure control of
servers and network devices,
and
power and user administration in the data center
environment. The Centralized Management systems combine
out-of-
band
access with modern IT standards and requirements. They are the most
nsive remote server maintenance solutions available in the market today.
Centralized Management settings
:
Enable Centralized Management
checkbox to enable
SmartRack 116 IP
be remotely managed by a Centralized Management system
.
When managed by Centralized Management, only Network Configuration is
SmartRack 116 IP
configuration page. All other settings, such
as Device Upgrade, Factory Restore, and SSL C
ertificate are disabled and are
managed from Centralized Management.
Manager Auto Discovery
checkbox to cause
the Centralized Management
automatically detect
SmartRack 116 IP, if
they both resid
Configuring
the Network
the Network Settings
User Guide | 33
SmartRack 116 IP
is
However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
SmartRack 116 IP
device name will appear on the DHCP server’s interface, making it easy to
checkbox to
SmartRack 116
checkbox to disa
ble
Default Gateway
for
secure control of
power and user administration in the data center
band
KVM via IP
access with modern IT standards and requirements. They are the most
nsive remote server maintenance solutions available in the market today.
SmartRack 116 IP
to
When managed by Centralized Management, only Network Configuration is
configuration page. All other settings, such
ertificate are disabled and are
the Centralized Management
they both resid
e on the same
- SmartRack 116 IP 1
- User Guide 1
- Legal Notice 2
- About this Document 3
- Style Conventions 4
- Table of Contents 5
- User Guide 7
- Table of Figures 10
- User Guide 11
- 1 Introduction 12
- 1.2 Terminology 13
- 1.3 Compatibility 13
- 1.5 Technical Precautions 13
- 1.7 Trademarks 14
- 1.8 WEEE Compliance 14
- 1.6 Safety 14
- 2 Installation 15
- Installation 16
- System Components 16
- 16 16
- The SmartRack 116 IP Unit 17
- Pre-Installation Guidelines 18
- 18 18
- Replacing the Bracket 19
- Connecting 20
- User Guide 21
- 22 22
- 2.5 Connecting the System 23
- 2.6 Connecting to the Servers 23
- Connecting a RICC/ROC PS/2 24
- Connecting a RICC 25
- /ROC USB 25
- Connecting a RICC SUN 26
- User Guide 27
- 3 Configuring the Network 28
- Interface 29
- Configuring the Network 30
- 30 30
- User Guide 31
- 32 32
- 3.3.2 Configuring 33
- Adding a User 34
- Configuring User Settings 35
- User Guide 35
- Deleting User(s) 36
- Blocking a User 36
- Editing User 36
- Information 36
- Configuring the KVM Switch 37
- 38 38
- Installing 40
- Upgrading Firmware 40
- User Guide 41
- 3.9 Reloading a 42
- 44 44
- Conducting 45
- Conducting a Remote Session 46
- Starting a Remote Session 46
- 46 46
- 4.2 Sharing a Remote Session 47
- Exclusive 48
- Full Screen Mode 49
- Verifying 50
- 50 50
- Adjusting the Video 52
- Manually 53
- Adjusting Video Settings 53
- Managing Keyboard Sequences 54
- User Guide 55
- Recording a New Custom Key 56
- Editing a Key Sequence 56
- Synchronizing Mouse Pointers 57
- 58 58
- The USB Option 59
- Aligning the M 60
- Pointers 60
- Calibrating Mouse 61
- 5 Troubleshooting – Safe Mode 62
- Restoring Factory Defaults 63
- Restoring the Device Firmware 64
- Figure 73 – Upgrade Succeeded 65
- Operating 66
- Using the Keyboard Hotkeys 66
- 66 66
- 6.2.3 Configuring t 67
- Configuring Security Settings 69
- Operating the SmartR 70
- Using the OSD 70
- 70 70
- Configuring the Port 71
- Configuring the T 72
- Configuring the Users 73
- Settings 73
- 74 74
- OSD Functions 75
- Scanning 76
- Computers (F4) 76
- Tuning (F5) 76
- Moving the Label ( F6) 77
- 78 78
- Starting and C 80
- Software 80
- Verifying the V 81
- RICC/ROC Version 82
- Obtaining N 83
- Firmware 83
- Troubleshooting 84
- – Update Software 84
- 6.4.4 Electricity F 85
- 86 86
- 7 Technical Specifications 87
- Technical Specifications 88
- 88 88
- User Guide 89
- 9 SNMP Events Table 90
- SNMP Events Table 91
- User Guide 91
- 201204210 • 933213_EN 92
Související produkty a manuály pro Sítě Minicom Advanced Systems Smart 4
(92 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce